From Project Persephone

PmWiki: Drop Towers

Drop tower - a facility used for achieving microgravity by dropping (or in some cases tossing) an experiment. Drop shafts are usually evacuated. Drop tubes usually don't have an experiment container.

A NASA zero-g lab

Project Persephone will require some way to validate its designs for telebots, inflatable space structures, and perhaps other mechanisms in orbiting exovivaria, under the most realistic conditions possible on Earth. At certain scales, and for operations not requiring too much time, drop tower experiments might suffice, especially if there is some way to brace the units under test as they are rapidly decelerated, so that testing is non-destructive. With appropriate bracing and sequencing, it might be possible to manually practice some kinds of telebotic operations, and study the behavior of some kinds of automated equipment, over several drop tower runs.

FallTurm Bremen

Drop towers equipped with catapults, such as FallTurm Bremen, can provide over 9 seconds of microgravity. Drop shafts drilled deep into the ground, such as JAMIC1 2, have provided up to 10 seconds. At up to 3 experiments per day3, it might be possible to perform about half a minute worth of microgravity tests and exercises per day, at the high-end facilities. There are other, shorter-duration facilities available in Australia4, in the U.S.5 6 7 (including a 1-second drop for assessing fuel slosh in scale models of spin-stabilized craft8), France9 and Japan.10


1 JAMIC drop shaft, Kami-sunagawa, Hokkaido

2 "Research under Microgravity Environment" Hokkaido National Industrial Research Institute

3 "Catapult Details - Bremen Drop Tower", ZARM Center of Applied Space Technology and Microgravity

4 QUT microgravity facility, Brisbane

5 2.2 second drop tower, NASA Glenn Research Center, Cleveland OH

6 Zero Gravity Research Facility (5 sec drop), NASA Glenn Research Center, Cleveland OH

7 Marshall Space Flight Center Dynamic Test Stand Drop Tube Facility - reportedly mothballed, narrow (26 cm) diameter, no container, destructive testing only

8 Applied Dynamics Laboratory, Portland OR

9 CERUM - Département d'études des Matériaux, Grenoble - drop tube, containerless, presumably destructive, metallurgical orientation

10 Micro-Gravity Laboratory of Japan (MGLAB),Kawai, Izumi-cho, Toki City, Gifu Pref

Retrieved from
Page last modified on December 21, 2017, at 11:18 PM